Beam swinging: Difference between revisions

From Glossary of Meteorology
imported>Perlwikibot
No edit summary
m (Rewrite with Template:Term and clean up)
 
Line 1: Line 1:
 
{{Term
 
|Display title=beam swinging
{{TermHeader}}
|Definitions={{Definition
{{TermSearch}}
|Num=1
 
|Meaning=
<div class="termentry">
A technique used by [[wind profilers]] to determine the [[vertical profile]] of the [[wind vector|wind  vector]] above the [[radar]] by measuring the line-of-sight component of the [[wind]] sequentially along  each of several different [[beam]] directions. The different beam directions can be obtained in various  ways: 1) mechanically steering a single fixed-beam [[antenna]]; 2) electronically or mechanically  steering the beam of a single fixed-position antenna (<br/>''see'' [[phased-array antenna]]); or 3) switching  between multiple fixed-beam antennas.<br/> Three beam positions can be used to determine the wind vector if it is assumed that the [[wind field|wind  field]] is the same along those beams. At least five beam positions must be used to measure both  the wind and its [[divergence]]. Wind profilers typically use one vertical beam and oblique beams  that are between 10&#x000b0; and 25&#x000b0; off vertical. Oblique angles closer to the [[zenith]] make separation of  horizontal and vertical wind components difficult and larger zenith angles make it less likely that  the wind is uniform over the horizontal distances between beams. Large zenith angles also increase  the radial [[range]] to the [[scattering]] volume at a given [[altitude]], thereby reducing the strength of  the returned [[signal]].
  <div class="term">
}}
== beam swinging ==
}}
  </div>
 
<div class="definition"><div class="short_definition">A technique used by [[wind profilers]] to determine the [[vertical profile]] of the [[wind vector|wind  vector]] above the [[radar]] by measuring the line-of-sight component of the [[wind]] sequentially along  each of several different [[beam]] directions. The different beam directions can be obtained in various  ways: 1) mechanically steering a single fixed-beam [[antenna]]; 2) electronically or mechanically  steering the beam of a single fixed-position antenna (<br/>''see'' [[phased-array antenna]]); or 3) switching  between multiple fixed-beam antennas.</div><br/> <div class="paragraph">Three beam positions can be used to determine the wind vector if it is assumed that the [[wind field|wind  field]] is the same along those beams. At least five beam positions must be used to measure both  the wind and its [[divergence]]. Wind profilers typically use one vertical beam and oblique beams  that are between 10&#x000b0; and 25&#x000b0; off vertical. Oblique angles closer to the [[zenith]] make separation of  horizontal and vertical wind components difficult and larger zenith angles make it less likely that  the wind is uniform over the horizontal distances between beams. Large zenith angles also increase  the radial [[range]] to the [[scattering]] volume at a given [[altitude]], thereby reducing the strength of  the returned [[signal]].</div><br/> </div>
</div>
 
{{TermIndex}}
{{TermFooter}}
 
[[Category:Terms_B]]

Latest revision as of 22:01, 13 January 2024

A technique used by wind profilers to determine the vertical profile of the wind vector above the radar by measuring the line-of-sight component of the wind sequentially along each of several different beam directions. The different beam directions can be obtained in various ways: 1) mechanically steering a single fixed-beam antenna; 2) electronically or mechanically steering the beam of a single fixed-position antenna (
see phased-array antenna); or 3) switching between multiple fixed-beam antennas.
Three beam positions can be used to determine the wind vector if it is assumed that the wind field is the same along those beams. At least five beam positions must be used to measure both the wind and its divergence. Wind profilers typically use one vertical beam and oblique beams that are between 10° and 25° off vertical. Oblique angles closer to the zenith make separation of horizontal and vertical wind components difficult and larger zenith angles make it less likely that the wind is uniform over the horizontal distances between beams. Large zenith angles also increase the radial range to the scattering volume at a given altitude, thereby reducing the strength of the returned signal.


  1. A collimated source of electromagnetic radiation (e.g., a laser beam).
Retrieved from "https://glossarystaging.ametsoc.net/w/index.php?title=Beam_swinging&oldid=28505"
Powered by MediaWiki
Powered by WikiTeq
Powered by Semantic MediaWiki
Copyright 2024 American Meteorological Society (AMS). For permission to reuse any portion of this work, please contact permissions@ametsoc.org. Any use of material in this work that is determined to be “fair use” under Section 107 of the U.S. Copyright Act (17 U.S. Code § 107) or that satisfies the conditions specified in Section 108 of the U.S.Copyright Act (17 USC § 108) does not require AMS’s permission. Republication, systematic reproduction, posting in electronic form, such as on a website or in a searchable database, or other uses of this material, except as exempted by the above statement, require written permission or a license from AMS. Additional details are provided in the AMS Copyright Policy statement.